TKC SERIES SELECTION CONFIGURATION
●BT40/BT50 gear head
●BT50 belt head
●Spindle center water outlet
●CNC turntable
●Pneumatic lift door
●FANUC system/or other systems
| Project | Unit | ModeL | ||||
| TKC2070 | TKC2570 | TKC3070 | TKC4070 | |||
| Workbench | Workbench dimensions (L × W) | mm | 2000×700 | 2500×700 | 3000×700 | 4000×700 |
| Maximum load of workbench | kg | 1500 | 2500 | 3500 | 4500 | |
| T-groove (groove number-groove width × pitch) | mm | 5-22×120 | 5-22×120 | 5-22×120 | 5-22×120 | |
| Coordinate range | Table left and right travel (X-axis) | mm | 2000 | 2500 | 3000 | 4000 |
| Column forward and backward travel (Y-axis) | mm | 700 | 700 | 700 | 700 | |
| Headstock travel up and down (Z-axis) | mm | 600 | 600 | 600 | 600 | |
| Distance from the end face of the main shaft to the worktable | mm | 100~700 | 100~700 | 100~700 | 100~700 | |
| Spindle | Spindle form | / | Belt drive | Belt drive | Belt drive | Belt drive |
| Maximum spindle speed | rpm | 8000 | 8000 | 8000 | 8000 | |
| Spindle bore taper | / | BT40 | BT40 | BT40 | BT40 | |
| Spindle outer diameter | mm | Φ150 | Φ150 | Φ150 | Φ150 | |
| Feed rate | Rapid movement speed (X/Y/Z) | m/min | 20/20/15 | 20/20/15 | 20/20/15 | 20/20/15 |
| Cutting feed speed | m/min | 1~10 | 1~10 | 1~10 | 1~10 | |
| Electric machinery | Spindle motor power | kW | 7.5/11 | 7.5/11 | 7.5/11 | 7.5/11 |
| Feed motor torque (X/Y/Z) | N.m | 28/28/28B | 28/28/28B | 28/28/28B | 35/28/28B | |
| Cooling pump motor | kW | 0.55 | 0.55 | 0.55 | 0.55 | |
| Precision | Positioning accuracy | mm | ±0.012/300 | ±0.012/300 | ±0.015/300 | ±0.015/300 |
| Repeated positioning accuracy | mm | ±0.008/300 | ±0.008/300 | ±0.008/300 | ±0.008/300 | |
| System | CNC system | / | Taiwan's new generation | Taiwan's new generation | Taiwan's new generation | Taiwan's new generation |
| Power source | Power supply | KVA | ≥ 25 | ≥ 30 | ≥ 35 | ≥ 40 |
| Air pressure | Air demand | kg/cm2 | ≥ 6 | ≥ 6 | ≥ 6 | ≥ 6 |
| Air source flow | m3/min | ≥ 0.5 | ≥ 0.5 | ≥ 0.5 | ≥ 0.5 | |
| Tool magazine | Tool magazine form | / | Disc manipulator | Disc manipulator | Disc manipulator | Disc manipulator |
| Magazine capacity | pcs | 24 | 24 | 24 | 24 | |
| Average tool change time (tool-to-tool) | sec | 2.5 | 2.5 | 2.5 | 2.5 | |
| Machine tool dimensions | Floor area (L × W × H) | mm | 5900×3100×3100 | 6900×3100×3100 | 7900×3100×3100 | 9900×3100×3100 |
| Machine weight (approx.) | kg | 10500 | 12000 | 13000 | 16500 | |
400-881-5651
Wechat
